 DRAWER
& HOUSING
MPI’s Drawer & Housings offer
a pre-engineered design solution to improve operator access
on manual clean models or complete automation on self
clean models. These features reduce or eliminate costly
man hours required to maintain maximum magnet performance.
The pre-engineered designs also improve plant area housekeeping
and minimize product loss during cleaning through the
use of robust and reliably designed Housing seals and
component mechanisms.
|
|
 |
 PNEUMATIC
LINE MAGNET
MPI’s Pneumatic Line Magnets are
designed exclusively for use in Dilute-Phase
pneumatic conveying systems. Typical applications
include powder or granular food products, pharmaceuticals,
plastics and chemicals that are conveyed in these, high
speed low density to air volume systems. As product is
conveyed in the line it is diverted around the magnet’s
nose cone and past the alternating north & south magnetic
poles. The tramp metals are captured on and collect behind
the sanitary welded, ribbed magnetic poles to minimize
tramp metal "wash-off".
|
|
ALL
MAGNETIC GRATE
MPI’s All Magnetic Grate is designed
to offer a 100% magnetic coverage Grate Magnet design.
The Grate Magnet’s frame element(s) is magnetically
charged to provide a powerful magnetic surface to collect
tramp metal and also magnetically charges the Grate Magnet’s
diverters. The diverters are made from 400 grade stainless
steel allowing them to become magnetized so they can also
capture tramp metal. This magnet product is commonly found
in choke fed gravity hopper systems such as plastics injection
molding machines.
|
|
 LIQUID
FINGER TRAP
MPI’s Liquid Trap Magnets are
designed to remove metal contaminants from food grade
quality, sanitary application liquid process flow lines.
The magnetic Tubes or "fingers" protrude from
the housing top, down into the process flow area. As product
is pumped past the magnetic tubes, metal contaminants
are captured and collected. Process line size, pressure
and product viscosity are three key factors when considering
this model magnetic separator.
|
|
 GRATE
& TUBE
MPI’s magnetic Grates and Tubes
provide effective magnetic protection in a wide variety
of free flowing, vertical, gravity product streams. They
are easy to install and are an economical solution to
protect processing equipment and improve or maintain product
quality standards. As tramp metals are captured, they
are washed around to the magnet’s underside where
it is hidden from oncoming product flow, eliminating tramp
metal "wash-off".
|
|
 COOLANT
CLEANER
MPI’s line of magnetic Coolant
Cleaners provide continuous cleaning and removal of large
volume tramp iron typically found in metal grinding, milling,
turning and broaching machines. The magnet slowly rotates
while partially submerged in the machine pump coolant
reservoir tank. As coolant is pumped into the tank, the
magnet attracts and removes the tramp metals from the
coolant where it is carried to the top of the magnet,
out of the tank. A wiper blade scrapes collected tramp
metals off of the magnet into a collection area for final
processing.
|
|
ROTO
GRATE
MPI’s magnetic Roto Grates are
designed to offer a magnetic solution for difficult flowing
products that typically bridge and choke in conventional
magnetic Grate or Drawer & Housing applications. These
magnets can capture many of the same tramp metal contaminants
successfully removed from process streams by magnetic
Grates or Drawer & Housing models however tramp metal
"wash-off" can be a factor when using this model
type ‘A’ magnetic separator.
|
 |
|
 INLINE
FILTER MAGNET
MPI’s Inline Filter Magnets
offer an industrial application class liquid flow magnetic
separation option. This model’s economical design
is ideally suited for applications such as EDM wire
machine pump reservoirs, hydraulic press lines or other
low pressure industrial product process lines.
|
|
Magnetic
Separators
